| Quantity: | |
|---|---|
Water-washing dust removal equipment is currently the most popular credit dust product in the market. It has large suction, good filtering effect, small footprint, low power consumption, never clogged, and automatic cleaning function. It is widely used in stone factories. , ceramic factory, chemical factory, bathroom factory, wood processing factory, painting room and other workshops
Techinical Data
Model Number: DL-4000
overall size: 4000*2200*720mm
fan power:0.75~1.5 kW
number of fans: 3 pcs.
pump power: 1.1 kW
total air intake: 45000-52000 m³/h
suction: 3.5-4.2 m/s
noise: 70-80db
sink, 304 steel
Installation, Usage and Maintenance
First of all, put the device in the designated location of the factory, and connect the 380% power supply and negative line. Adjust the positive and negative directions of the fan and water pump, connect the water supply pipe (above the automatic water replenishment valve), fill up the water in the water tank, first turn on the water pump and then turn on the fan to use.
1 Effective distance; the effective suction of this device is about 4 meters, if it exceeds 4 meters, a small fan can be used to assist to achieve the best effect;
2. Power saving function: If there are few workers and you don’t need to work continuously, you can use the automatic power on the device. When you are working, the device will automatically work. When you stop working, the device will automatically stop after about 8 seconds , saving power consumption;
3. Maintenance and maintenance: The equipment should be maintained and maintained regularly. It is best to arrange a special person to be responsible. When the equipment is used for about a week (determined according to the amount of dust), the front and rear doors should be opened to wash the residual dust on the filter layer to prevent the ventilation device from being blocked. Affect the suction of the equipment. When there is too much dust in the water tank, it should be cleaned in time (about 15 days), open the automatic cleaning valve to flush the sediment into sewage, discharge the sewage, refill with clean water, and continue to use.
Cautions
1.During use, the water tank must be kept filled with water automatically, so as not to cause the water pump to burn out due to lack of water;
2.During use, the sediment in the water tank should not exceed 10 cm thick, so as not to block the pump and cause damage；
3. Regular maintenance and cleaning of the filtering net, just open the back door and rinse it with water.
After-sales Service
1. Dialead Stone Machinery offer one year's warranty
2. For consumables, Dialead Stone Machinery sends one extra set with the machine container.
3. Dialead Stone Machinery will send the experienced technicians to your factory to install the machine and teach your workers to operate the machine.
Workshop
Machine Loading
Certificate
Our Partners
Dialead Enterprise
Quanzhou Dialead Stone Machinery Co., Ltd. is a high-tech enterprise founded by Dialead Stone Tools, together with several domestic well-known engineering colleges, stone machinery technicians and software system companies. Dialead Stone Machinery main products include five-axis bridge cutting machine, four-axis bridge cutting machine, stone copying machine, baluster machine, engraving machine, block cutting machine, polishing machine and etc. With constant technology innovation, stone processing industry has now developed to intelligent automatic processing from initial rough processing. Dialead is always devoted to the improvement of its technology and making contribution to the development of the industry.
Engaged in the production of stone tools (diamond segment, saw blade, engraving knives, stone polishing abrasives) for more than 20 years, Dialead has a good knowledge of stone tools and specific needs of different markets. When it comes to stone machinery, Dialead can well match its stone machines with its stone tools to achieve the best processing effect. This is what tells Dialead apart from other stone machinery suppliers in China.
With complete R & D and production system, Dialead is seeing its sales map bigger and bigger. For domestic market, Dialead Stone Machinery has set up offices in many cities. For international market, Dialead products are exported to more than 60 countries and regions, such as Russia, the United States, Ukraine, Kazakhstan, India, Poland, Jordan, Oman and etc.
Dialead attaches great importance to intellectual property and certification in its development. Dialead has obtained more than 30 patent and more is in the way. All Dialead machines are CE certified to make sure all details meet international standards.
Stone Exhibition
Dialead Stone Machinery has attended many stone exhibition like Xiamen stone fair, italy verona stone fair,russian moscow stone fair, turkey izmir stone fair, iran tehran stone fair etc. Due to the corona virus spreading in the world since 2020, we have missed the stone exhibition worldwide. Hope we can win over the war against corona virus, Dialead enterprise is looking forward to meeting you again soon!
Water-washing dust removal equipment is currently the most popular credit dust product in the market. It has large suction, good filtering effect, small footprint, low power consumption, never clogged, and automatic cleaning function. It is widely used in stone factories. , ceramic factory, chemical factory, bathroom factory, wood processing factory, painting room and other workshops
Techinical Data
Model Number: DL-4000
overall size: 4000*2200*720mm
fan power:0.75~1.5 kW
number of fans: 3 pcs.
pump power: 1.1 kW
total air intake: 45000-52000 m³/h
suction: 3.5-4.2 m/s
noise: 70-80db
sink, 304 steel
Installation, Usage and Maintenance
First of all, put the device in the designated location of the factory, and connect the 380% power supply and negative line. Adjust the positive and negative directions of the fan and water pump, connect the water supply pipe (above the automatic water replenishment valve), fill up the water in the water tank, first turn on the water pump and then turn on the fan to use.
1 Effective distance; the effective suction of this device is about 4 meters, if it exceeds 4 meters, a small fan can be used to assist to achieve the best effect;
2. Power saving function: If there are few workers and you don’t need to work continuously, you can use the automatic power on the device. When you are working, the device will automatically work. When you stop working, the device will automatically stop after about 8 seconds , saving power consumption;
3. Maintenance and maintenance: The equipment should be maintained and maintained regularly. It is best to arrange a special person to be responsible. When the equipment is used for about a week (determined according to the amount of dust), the front and rear doors should be opened to wash the residual dust on the filter layer to prevent the ventilation device from being blocked. Affect the suction of the equipment. When there is too much dust in the water tank, it should be cleaned in time (about 15 days), open the automatic cleaning valve to flush the sediment into sewage, discharge the sewage, refill with clean water, and continue to use.
Cautions
1.During use, the water tank must be kept filled with water automatically, so as not to cause the water pump to burn out due to lack of water;
2.During use, the sediment in the water tank should not exceed 10 cm thick, so as not to block the pump and cause damage；
3. Regular maintenance and cleaning of the filtering net, just open the back door and rinse it with water.
After-sales Service
1. Dialead Stone Machinery offer one year's warranty
2. For consumables, Dialead Stone Machinery sends one extra set with the machine container.
3. Dialead Stone Machinery will send the experienced technicians to your factory to install the machine and teach your workers to operate the machine.
Workshop
Machine Loading
Certificate
Our Partners
Dialead Enterprise
Quanzhou Dialead Stone Machinery Co., Ltd. is a high-tech enterprise founded by Dialead Stone Tools, together with several domestic well-known engineering colleges, stone machinery technicians and software system companies. Dialead Stone Machinery main products include five-axis bridge cutting machine, four-axis bridge cutting machine, stone copying machine, baluster machine, engraving machine, block cutting machine, polishing machine and etc. With constant technology innovation, stone processing industry has now developed to intelligent automatic processing from initial rough processing. Dialead is always devoted to the improvement of its technology and making contribution to the development of the industry.
Engaged in the production of stone tools (diamond segment, saw blade, engraving knives, stone polishing abrasives) for more than 20 years, Dialead has a good knowledge of stone tools and specific needs of different markets. When it comes to stone machinery, Dialead can well match its stone machines with its stone tools to achieve the best processing effect. This is what tells Dialead apart from other stone machinery suppliers in China.
With complete R & D and production system, Dialead is seeing its sales map bigger and bigger. For domestic market, Dialead Stone Machinery has set up offices in many cities. For international market, Dialead products are exported to more than 60 countries and regions, such as Russia, the United States, Ukraine, Kazakhstan, India, Poland, Jordan, Oman and etc.
Dialead attaches great importance to intellectual property and certification in its development. Dialead has obtained more than 30 patent and more is in the way. All Dialead machines are CE certified to make sure all details meet international standards.
Stone Exhibition
Dialead Stone Machinery has attended many stone exhibition like Xiamen stone fair, italy verona stone fair,russian moscow stone fair, turkey izmir stone fair, iran tehran stone fair etc. Due to the corona virus spreading in the world since 2020, we have missed the stone exhibition worldwide. Hope we can win over the war against corona virus, Dialead enterprise is looking forward to meeting you again soon!
