Views: 143 Author: Site Editor Publish Time: 2022-09-04 Origin: Site
Stone Groove Opening Machine is mainly used for grooving when treating asphalt and cement pavement cracks. With six special blades, irregular cracks are quickly organized into uniform grooves to form new joint surfaces. Optimize the contact level between the filling material and the slot, and strengthen the tightness of the bonding between the filling material and the side wall of the slot.
What are the structural features of the Stone Groove Opening Machine?
How to choose Stone Groove Opening Machine?
What should be paid attention to when carrying out construction with Stone Groove Opening Machine?
1. The output shaft of the Stone Groove Opening Machine forms an included angle of fewer than 180 degrees with the bottom plane of the fuselage;
2. The tool of Stone Groove Opening Machine is installed on the cantilever of the output shaft; the bottom of the machine is equipped with two rollers. Deep and wide grooves can be made with the smallest diameter tool. At the same time, due to the small diameter of the tool, it can be realized with the smallest output power, thereby reducing energy consumption and improving the service life of the machine itself;
3. The body of the Stone Groove Opening Machine can be rolled on the wall, and the depth and width of the slot can be controlled by adjusting the height of the roller. It achieves the practicability of reasonable structure, convenient use, high efficiency and energy saving.
4. Dust-free one-time molding.
The Stone Groove Opening Machine can adjust the width and thickness of the slot. The thicker and wider the slot machine's motor will turn slower, and it will feel very laborious. Don't buy cheap ones produced by small manufacturers, they are easy to break. The Stone Groove Opening Machine should not work for a long time during use. The motor should be stopped for a while when it heats up, and the construction can be continued after the temperature has cooled down. This kind of tool is the most likely to damage the motor and rotor, so it should be maintained frequently, and the dirty things should be cleaned after construction. The slotting machine is suitable for the dark laying of line pipes and water pipes on walls and floors. The work efficiency is greatly improved, and there is no dust.
During the grooving process of the Stone Groove Opening Machine, pay attention to the horizontal grooving of the load-bearing wall not exceeding 100 cm, because doing so may damage the load-bearing of the entire building, reduce the seismic capacity and cause the wall to crack. In the case of thermal insulation walls, excessively long transverse grooves may cause the thermal insulation layer to fall off as a whole, causing unnecessary accidents. The best angle for wall slotting is vertical slotting.
Dialead Stone Machinery has focused on the field of Stone Groove Opening Machines for many years, it has attracted a large number of consumers around the world with its high-quality products, appropriate prices, and excellent services.
