Why do we need Stone Slab Lifter?

The operation of the Stone Slab Lifter is on the top, which makes it easier to grab, drop, and release. This is also one of the main advantages of using a vacuum spreader to move things.

How does the Stone Slab Lifter work?

What are the product features of the semi-automatic slate vacuum lifter?

What are the advantages of using Stone Slab Lifter?

How does the Stone Slab Lifter work?

1. Stone Slab Lifter's vacuum pump creates a vacuum in the system by continuously evacuating air. The difference between negative and ambient pressure attracts the workpiece to the vacuum fixture. This is often referred to as "picking up" the cargo. Once the cargo is picked up, the flow rate causes the riser to contract and the cargo is lifted.

2. Lower and release the load

The Stone Slab Lifter uses an operating handle to send atmospheric air into the system ("ventilation"). The vacuum level is reduced, which causes the riser tube to expand and reduce the load. Lift height can be precisely controlled by controlling the amount of atmospheric air entering the system. To release the load, the vacuum can be fully released by operating the handle to maximize ventilation (fully pressing the control button).

What are the product features of the semi-automatic slate vacuum lifter?

Semi-automatic slate vacuum lifter is used for hoisting granite slabs. It can be used with granite wire polishing machine, granite stone flamethrower, curb stone cutting machine.

Reduce the labor burden of manual hoisting and improve work efficiency.

The extensive use of semi-automatic slate vacuum lifts reduces labor intensity and labor costs.

The semi-automatic slate vacuum lift is easy to operate and accessible to all

The semi-automatic slate vacuum lifter is specially developed for stone, and has a good adsorption capacity for stone, especially for rough surfaces such as burnt surface and lychee surface.

The semi-automatic slate vacuum lift has a large suction area and a large suction force. The maximum suction power can reach 1000kg.

Semi-automatic slate vacuum lifts are easy to install and move. Suitable for different workplaces (the swivel cantilever lift can be customized according to your requirements)

Semi-automatic slate vacuum lifts are specially designed for dusty environments. Works with water without worrying about dust and sand. Ultra-low failure rate. Maintenance free.

What are the advantages of using Stone Slab Lifter?

1. Fast operation

The vacuum energy of the Stone Slab Lifter is stored in the vacuum accumulator, which can be transferred to the suction cup in one second, and sucked instantly; in two seconds, the vacuum in the suction cup can return to one atmospheric pressure and be released instantly.

2. Safe adsorption, no damage to the material surface

Stone Slab Lifter mainly relies on the vacuum source to generate vacuum in the air inside the suction cup. Generally, the suction cup is made of silica gel, natural rubber, nitrile rubber, etc., which can complete the non-destructive handling or feeding of materials such as plates and glass.

3. Safe to use

The vacuum for the Stone Slab Lifter usually comes from the accumulator. The energy reserve can hold the load for several hours in the event of a vacuum pump failure.

The degree of vacuum is controllable. Sensors can show the system in case of leakage and the load is released. The load will not fall as long as there is a proper vacuum in the suction cup. Just a law of physics.

To meet these growing demands, Dialead Stone Machinery has various Stone Slab Lifters that can provide the increasing of products, and make them more effective, reliable, and consistent.