Publish Time: 2022-07-06 Origin: Site
Marble column machine is a popular slate processing equipment on the market at present. It is controlled by an intelligent system throughout the process, does not require manual assistance, and is much more efficient than traditional.
How does the marble column machine work?
What is the product introduction of marble column machine?
What should I pay attention to when using marble column machine?
Working principle of marble column machine: There are two types of stone profiling machines, one is template type, that is, the drawing is carved into a template, which is stuck in the middle of two optical fiber sensors, and automatically follows the template for profiling, making a blank, and then Manual grinding; the second is computer-based. The drawings are compiled into instruction codes, input into the computer, and control instructions are automatically generated to control the left and right, up and down stepper motors, process them into blanks, and then perform manual grinding.
The multi-head column forming machine is easy to operate and adopts frame machine design, microcomputer control, and optical measurement and control.
The marble column machine can cut any shape of circular railing balls, column bases, column caps and other rotating body stones.
The biggest advantage of this machine is that it can cut 8 posts at the same time. This can greatly improve the efficiency of the factory.
Marble column machines are exported to more than 2,000 foreign countries and are widely accepted and welcomed by many people around the world.
(1) During the operation of the marble column machine, the cooling water used shall not be interrupted, and the water consumption should be adjusted so that the working surface does not dry out.
(2) During the operation of marble column machine, when the grinding disc jumps or makes abnormal noise, it should be stopped immediately for maintenance. When shutting down, the grinding disc should be lifted first and then shut down.
(3) After replacing the new grindstone, it should be ground on the waste water grindstone floor or the surface of the waste cement product for 1-2 hours. After the diamond cutting edge is ground out, it should be put into operation on the working surface.
(4) The grinding block must be clamped, and the fixture should be checked frequently to prevent the grinding stone from flying out and hurting people.
(5) After the marble column machine is operated, the power supply should be cut off, the mud in each part should be cleaned, placed in a dry place, and covered with a rain-proof cloth.
(6) Marble column machine electrical circuits, switches, etc., must be installed and overhauled by electricians, and other personnel are not allowed to disassemble and connect at will.
Would you like to order a marble column machine against this background? If necessary, you can contact Dafon Stone Machinery Co., Ltd. You will supply the marble column machine of best quality.