Publish Time: 2022-09-08 Origin: Site
The stone polishing machine is a device that can polish and polish the ground stone. It can be adapted to different grinding blocks or grinding discs. It can professionally grind and polish various marble, terrazzo, granite, floor tiles and other stones by shifting the gear or changing the frequency of the motor. The ground, so that the stone can restore the brightness of the factory.
What are the steps to use the stone polishing machine?
What is the working process of stone polishing machine?
Can the stone polishing machine perform maintenance work on the material?
① Coarse grinding: It is required that the grinding blade has a deep knife, high grinding efficiency, rough grinding lines, and rough surface. The stone polishing machine mainly removes the saw blade marks left by the stone in the previous process and removes the stone. The flatness of the molding surface is ground in place;
②Semi-fine grinding: The stone polishing machine removes the rough grinding marks to form new finer lines, making the stone surface flat and smooth;
③Fine grinding: The stone surface pattern, particle and color after fine grinding by the stone polishing machine have been clearly displayed, the surface is fine and smooth, and there is a slight gloss at the beginning;
④ Fine grinding: The stone surface after fine grinding by the stone polishing machine has no traces detected by the naked eye. The surface is getting smoother and smoother, and the gloss can be up to 55 degrees or more;
⑤Polishing: Use a special stone polishing machine to grind the stone from the 50th to 3000th stone water mill from coarse to fine, so that the ground is bright and flat as new. The polished stone surface is as bright as a mirror, and its gloss can reach more than 85 degrees.
1. First, put the plate to be processed by the stone polishing machine on the conveyor belt and send it to the predetermined position;
2. Then put the plate in the drum and roll it back and forth to make the impurities fall off and reach a certain roughness requirement (usually about 60~100 mesh);
3. Finally, take it out manually and grind and polish it to complete the processing work.
The material is roughly ground with an abrasive sheet, cross-ground horizontally and vertically, and then the dirt on the surface is cleaned with a vacuum cleaner. After rough grinding and fine grinding, the polishing effect has reached the required brightness, and then the crystal powder and stone polishing machine are used to make the hardness of the crystal on the surface of the terrazzo reach the wear resistance of the terrazzo. Finally, the terrazzo is maintained.
Dialead Stone Machinery CO., LTD, as a Chinese pioneer in rolling and bending machines, can ensure the stone polishing machines’ quality and after-sales service.